Removing A Processor - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê If necessary, remove the memory as described in section
memory module" on page
Ê Open the server blade as described in section
on page 60.
Ê Remove the desired processor heat sink as described in section
processor heat sinks" on page
9.3.3

Removing a processor

I
This description applies to the following procedures:
– Removing CPU 2 from a dual-processor configuration
– Removing CPUs from a system board (see section
processors" on page
Ê Remove the desired processor heat sink as described in section
processor heat sinks" on page
BX924 S3
54.
173.
227.
194)
227.
Upgrade and Maintenance Manual
Processors
"Shutting down the
59.
"Removing a
"Opening the server blade"
"Removing
"Removing
"Removing
195