Platform_Vlan Messages - Cisco Catalyst 3750-X Message Manual

Chapter 2 Message and Recovery Procedures
Error Message PLATFORM_UCAST-6-PREFIX: One or more, more specific prefixes could not
be programmed into TCAM and are being covered by a less specific prefix

PLATFORM_VLAN Messages

Error Message PLATFORM_VLAN-3-LOCK_FAIL: Failed to lock vlan-id [dec], associated
mapped vlan id value [dec].
Error Message PLATFORM_VLAN-3-MVID_ERROR: Mapped Vlan ID value [dec] associated with
vlan-id [dec] is invalid.
Error Message PLATFORM_VLAN-3-UNLOCK_FAIL: Failed to unlock vlan-id [dec],
associated mapped vlan id value [dec].
OL-9772-05
Explanation A more specific prefix could not be programmed into TCAM and is covered by a less
specific prefix. This could be a temporary condition. The output of the show platform ip unicast
failed route privileged EXEC command lists the failed prefixes.
Recommended Action No action is required.
The VLAN lock operation failed. This can occur if the VLAN is already active in the
Explanation
system or if the VLAN ID is not active. The first [dec] is the VLAN ID, and the second [dec] is the
mapped-vlan-id (MVID).
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
An active VLAN is not correctly associated with a MVID. The first [dec] is the VLAN
Explanation
ID, and the second [dec] is the MVID.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The switch did not unlock a VLAN ID. The most likely cause is that the VLAN is
Explanation
already unlocked. The first [dec] is the VLAN ID, and the second [dec] is the MVID.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
1-7.
1-7.
1-7.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
PLATFORM_VLAN Messages
"Error
"Error
"Error
2-81