Cisco Catalyst 3750-X Message Manual page 89

Chapter 2 Message and Recovery Procedures
Error Message PLATFORM_STACKPOWER-4-VERSION_MISMATCH: Major version mismatch in
stack power protocol message on switch [dec]
Explanation
stack member number.
Recommended Action
software release.
Error Message PLATFORM_STACKPOWER-3-INVALID_TOPOLOGY: Invalid power stack topology
observed by switch [dec] [chars]
Explanation
[dec] is the stack member number. [chars] is a number that explains the reason for the invalid power
stack topology.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message PLATFORM_STACKPOWER-4-POWER_BUDGET: Switch [dec] power budget is at
least 1000W greater than its local supplies
Explanation
the switch stack's power supplies. Add another power supply to the switch stack. [dec] is the stack
member number.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message PLATFORM_STACKPOWER-4-CABLE_A_CURRENT_IN: Switch [dec] stack power
cable 1 inward current is over the limit
Explanation
power supply to the switch stack. [dec] is the stack member number.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
OL-9772-05
A version mismatch exists between the switch and the other stack members. [dec] is the
Ensure that all switches in the power stack are running the same Cisco IOS
The power stack topology is invalid. The switch is forced into standalone mode.
Copy the message exactly as it appears on the console or in the system log.
The power budget of the switch is more than 1000 W above the rated power output for
Copy the message exactly as it appears on the console or in the system log.
Power cable 1 of the switch stack has an inward current that is over 40 A. Add another
Copy the message exactly as it appears on the console or in the system log.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
PLATFORM_STACKPOWER Messages
1-7.
1-7.
1-7.
"Error
"Error
"Error
2-71