Express_Setup Messages - Cisco Catalyst 3750-X Message Manual

Chapter 2 Message and Recovery Procedures

EXPRESS_SETUP Messages

For Express Setup with the Ethernet management port, see the
Note
Error Message EXPRESS_SETUP-3-UNABLE_TO_RESET_CONFIG: [chars].
Error Message EXPRESS_SETUP-6-CONFIG_IS_RESET: [chars].
Error Message EXPRESS_SETUP-6-MODE_ENTERED.
Error Message EXPRESS_SETUP-6-MODE_EXITED.
OL-9772-05
The system cannot reset the configuration. [chars] is a text string that explains why the
Explanation
reset failed. For example,
error renaming config file
removing private config file
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The configuration is reset. [chars] is a text message that clarifies the reset event, such
Explanation
as
The configuration is reset and the system will now reboot
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The Express Setup mode is active.
Explanation
Recommended Action No action is required.
The Express Setup mode is no longer active.
Explanation
No action is required.
Recommended Action
.
1-7.
1-7.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
EXPRESS_SETUP Messages
CLS_ACC Messages section.
,
error removing config file
.
, or
error
"Error
"Error
2-35