Hpsecure Messages; Hulc_License Messages - Cisco Catalyst 3750-X Message Manual

Chapter 2 Message and Recovery Procedures

HPSECURE Messages

Error Message HPSECURE-6-ADDR_REMOVED: Address [enet]:[dec] on port [chars] cannot
be added on switch [dec] and has been removed.
Note

HULC_LICENSE Messages

Error Message HULC_LICENSE-1-LICENSE_REGISTER_FAILED: [chars] - rc = [dec]
Explanation
failed, and [dec] is the type of license initialization error.
OL-9772-05
There is a local resource error or that too many outgoing messages are queued for the
Explanation
message class. [dec] is the RPC request number, and [chars] is an optional comment.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message applies only to the Catalyst 3750-X and 3750-E switches.
At least one switch in the stack could not add the MAC address due to a resource failure,
Explanation
and the MAC address has been deleted from all the switches in the stack. [enet] is the MAC address,
the first [dec] is the VLAN to which the MAC address is assigned, [chars] is the interface, and the
second [dec] is the stack member number.
No action is required.
Recommended Action
The licensing initialization failed. [chars] explains what part of the license registration
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information.
1-7.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
HPSECURE Messages
"Error
2-43