Cisco Catalyst 3750-X Message Manual page 107

Hide thumbs Also See for Catalyst 3750-X:
Table of Contents

Advertisement

Chapter 2
Message and Recovery Procedures
Error Message PM-4-PVLAN_TYPE_CFG_ERR: Failed to set VLAN [dec] to a [chars] VLAN.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message PM-4-TOO_MANY_APP: application '[chars]' exceeded registration limit.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message PM-4-UNKNOWN_HOST_ACCESS: Invalid Host access value ([dec]) is
received.
Explanation
value that is received.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message PM-4-VMPS_CFG: Dynamic access VLAN [dec] same as voice vlan on [chars].
Explanation
interface. [dec] is the access VLAN ID, and [chars] is the physical interface.
Recommended Action
from the voice VLAN ID.
Error Message PM-6-EXT_VLAN_ADDITION: Extended VLAN is not allowed to be configured
in VTP CLIENT mode.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
OL-9772-05
The platform did not set a private VLAN type. [dec] is the VLAN ID.
Copy the message exactly as it appears on the console or in the system log.
The port manager detected an invalid request. [chars] is the application.
Copy the message exactly as it appears on the console or in the system log.
The host access table is being accessed with an invalid host access value. [dec] is the
Copy the message exactly as it appears on the console or in the system log.
The access VLAN ID on the VMPS server is the same as the voice VLAN ID on the
Assign the access VLAN on the VMPS server to a VLAN ID that is different
The switch did not add a VLAN in VTP client mode.
Copy the message exactly as it appears on the console or in the system log.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
1-7.
1-7.
1-7.
PM Messages
"Error
"Error
"Error
2-89

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3560-xCatalyst 3560-eCatalyst 3750-e

Table of Contents