Cisco Catalyst 3750-X Message Manual page 96

Hide thumbs Also See for Catalyst 3750-X:
Table of Contents

Advertisement

PLATFORM_STACKPOWER Messages
Error Message PLATFORM_STACKPOWER-4-BISP_POE_PORT: Switch [dec] experienced a port
BISP event
Explanation
occurred. [dec] is the stack member number.
Recommended Action
Error Message PLATFORM_STACKPOWER-4-BISP_PORT_A_SC: Switch [dec] experienced a
short-circuit BISP event on port 1
Explanation
[dec] is the stack member number.
Recommended Action
the message exactly as it appears on the console or in the system log. Research and attempt to
resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported
problems. If you still require assistance, open a case with the TAC, or contact your Cisco technical
support representative, and provide the representative with the gathered information. For more
information about these online tools and about contacting Cisco, see the
Reports" section on page
Error Message PLATFORM_STACKPOWER-4-BISP_PORT_B_SC: Switch [dec] experienced a
short-circuit BISP event on port 2
Explanation
[dec] is the stack member number.
Recommended Action
the message exactly as it appears on the console or in the system log. Research and attempt to
resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported
problems. If you still require assistance, open a case with the TAC, or contact your Cisco technical
support representative, and provide the representative with the gathered information. For more
information about these online tools and about contacting Cisco, see the
Reports" section on page
Error Message PLATFORM_STACKPOWER-4-BISP_NBR_DEAD: Switch [dec] [dec] neighbor
experienced a major BISP event
Explanation
first [dec] and second [dec] are the stack member numbers on each side of the neighbor.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
2-78
A built-in self protection (BISP) event that affected Power over Ethernet (PoE)
No action is required.
A short-circuit built-in self protection (BISP) event occurred on port 1 of the switch.
Disable and then enable port 1 of the switch. If the message appears again, copy
1-7.
A short-circuit built-in self protection (BISP) event occurred on port 2 of the switch.
Disable and then enable port 2 of the switch. If the message appears again, copy
1-7.
A major built-in self protection (BISP) event shut down the neighbor of the switch. The
Copy the message exactly as it appears on the console or in the system log.
Chapter 2
Message and Recovery Procedures
"Error Message Traceback
"Error Message Traceback
1-7.
"Error
OL-9772-05

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3560-xCatalyst 3560-eCatalyst 3750-e

Table of Contents