Cisco Catalyst 3750-X Message Manual page 59

Chapter 2 Message and Recovery Procedures
Error Message HARDWARE-3-PORTNUM_ERROR: [traceback] port number [dec] is invalid
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information.
Error Message HARDWARE-3-THERMAL_NOT_FUNCTIONING: Temperature Sensor is not
functioning.
Explanation
be determined.
Recommended Action
again, replace the component.
Error Message HARDWARE-3-STATS_ERROR: Statistics ID [dec] is invalid.
Explanation
identified by an ID. [dec] is the statistics ID.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message HARDWARE-5-FAN_NOT_PRESENT: Fan is not present.
Explanation
Recommended Action
replace it into the switch. If the message appears again after insertion, replace the fan.
Error Message HARDWARE-5-FAN_OK: Fan works fine.
Explanation
Recommended Action
OL-9772-05
The port number is out of range. [dec] is the port number.
Copy the message exactly as it appears on the console or in the system log.
The temperature sensor is not functioning, and the switch temperature behavior cannot
Ensure that the ambient temperature is not too high. If the message appears
The statistics ID used is out of range. The statistics supported by the port ASIC are
Copy the message exactly as it appears on the console or in the system log.
The fan is not in the switch.
Make sure the fan is completely inserted. If the fan is removable, remove and
The fan is now working properly.
No action is required.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
1-7.
HARDWARE Messages
"Error
2-41