Cisco Catalyst 3750-X Message Manual page 34

CLS_ACC Messages
Error Message CLS_ACC-5-CLRCFG: User cleared switch configurations under recovery
mode
Explanation
Recommended Action
Error Message CLS_ACC-5-RSTIMG: User reset switch image to factory default image
under recovery mode
Explanation
Recommended Action
Error Message CLS_ACC-7-ACC_INTF: Selected management interface: [chars] interface
number: [dec]
Explanation
and [dec] is the number of the interface.
Recommended Action
Error Message CLS_ACC-7-ACC_VLAN: Selected vlan [dec] for consoleless access
Explanation
is the VLAN ID.
Recommended Action
Error Message CLS_ACC-7-CONFIG: Save access intf config: if: [chars], port num:
[dec], vlan [dec], admin-down?:[dec]
Explanation
mode and the management interface is configured, the saved configuration takes effect. [chars] is
the name of the mode. The first [dec] is the port number, the second [dec] is the VLAN ID, and the
third [dec] is the port status.
Recommended Action
Error Message CLS_ACC-7-CONFIG_SUCCESS: [chars]
Explanation
restored. [chars] is the name of the configuration file.
Recommended Action
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
2-16
The switch resets to the default configuration in recovery mode.
No action is required.
In recovery mode, the switch image resets to the default image.
No action is required.
An interface has been selected for Express Setup. [chars] is the name of the interface,
No action is required.
The switch assigned a VLAN to the management interface for consoleless access. [dec]
No action is required.
The switch has saved the interface configuration. After the switch exits Express Setup
No action is required.
The management interface has been configured, or its original configuration has been
No action is required.
Chapter 2 Message and Recovery Procedures
OL-9772-05