Cisco Catalyst 3750-X Message Manual page 24

ACLMGR Messages
Error Message ACLMGR-3-NOLABEL: Cannot allocate [chars] label for interface [chars].
Explanation
means that the hardware cannot be programmed to implement the features, and packets for this
interface will be filtered in software. There is a limit of 256 labels per direction. The first [chars] is
the direction (input or output), and the second [chars] is the interface name.
Recommended Action
possible.
Error Message ACLMGR-3-OUTTTABLE: Not in truth table: RACL [dec] VLMAP [dec].
Explanation
and second [dec] are the internal action codes.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message ACLMGR-3-PACLTTABLE: Not in truth table: IPSrcGrd [dec] PACL [dec].
Explanation
first [dec] is the action specified by IP source guard, and the second [dec] is the action specified by
the port ACL.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message ACLMGR-3-QOSTTABLE: Not in truth table: ACL [dec] in map, action [dec].
Explanation
The first [dec] is the ACL number, and the second [dec] is the action corresponding to the specified
ACL number.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
2-6
The ACL manager could not allocate a label for the features on this interface. This
Use a simpler configuration. Use the same ACLs on multiple interfaces, if
A software error occurred while trying to merge the configured output features. The first
Copy the message exactly as it appears on the console or in the system log.
A software error occurred while trying to merge the configured port ACL features. The
Copy the message exactly as it appears on the console or in the system log.
A software error occurred while trying to merge a quality of service (QoS) policy map.
Copy the message exactly as it appears on the console or in the system log.
Chapter 2 Message and Recovery Procedures
1-7.
1-7.
1-7.
"Error
"Error
"Error
OL-9772-05