Aclmgr Messages - Cisco Catalyst 3750-X Message Manual

Chapter 2 Message and Recovery Procedures
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

ACLMGR Messages

Error Message ACLMGR-2-NOMAP: Cannot create ACL Manager data structures for VLAN Map
[chars].
Error Message ACLMGR-2-NOVLB: Cannot create memory block for VLAN [dec].
OL-9772-05
SPANTREE Messages, page 2-99
SPANTREE_FAST Messages, page 2-106
SPANTREE_VLAN_SW Messages, page 2-107
STACKMGR Messages, page 2-107
STORM_CONTROL Messages, page 2-109
SUPERVISOR Messages, page 2-110
SUPQ Messages, page 2-110
SW_DAI Messages, page 2-112
SW_MACAUTH Messages, page 2-114
SW_MATM Messages, page 2-115
SW_VLAN Messages, page 2-115
SWITCH_QOS_TB Messages, page 2-121
TCAMMGR Messages, page 2-121
UDLD Messages, page 2-123
UFAST_MCAST_SW Messages, page 2-125
VQPCLIENT Messages, page 2-125
WCCP Messages, page 2-126
The ACL manager could not allocate the data structures needed to describe a VLAN
Explanation
map into a form that can be loaded into hardware. This error is most likely caused by lack of free
memory. [chars] is the VLAN map name.
Reduce other system activity to ease memory demands.
Recommended Action
The ACL manager could not save per-VLAN information needed for its correct
Explanation
operation. Some per-interface features, such as access groups or VLAN maps, will not be configured
correctly. [dec] is the VLAN ID.
Use a less complicated configuration that requires less memory.
Recommended Action
(only Catalyst 3750-X and 3750-E switches)
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
ACLMGR Messages
2-3