Pt Messages; Qosmgr Messages - Cisco Catalyst 3750-X Message Manual

PT Messages

PT Messages
Error Message PT-3-PT_HW_UNAVAIL: Protocol Tunneling hardware resource not
available. [chars]

QOSMGR Messages

Error Message QOSMGR-3-FEATURE_NOT_FOUND: Cannot find feature for [chars].
Error Message QOSMGR-3-FILTERTYPE_INVALID: Internal Error Invalid Policy filtertype
[dec].
Error Message QOSMGR-3-MERGE_RES_COUNT: Internal Error Invalid count.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
2-92
Protocol tunneling could not be enabled because no redirect registers are available.
Explanation
Protocol tunneling requires redirect registers. [chars] is the hardware resource that is not available.
Disable any applications that use redirect registers, and try configuring the
Recommended Action
protocol tunneling again.
An internal software error has occurred. [chars] is the description of the feature that the
Explanation
software cannot find.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
An internal software error has occurred. [dec] is the invalid filter type identification.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
An internal software error has occurred.
Explanation
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Chapter 2 Message and Recovery Procedures
1-7.
1-7.
1-7.
"Error
"Error
"Error
OL-9772-05