Platform_Env Messages - Cisco Catalyst 3750-X Message Manual

PLATFORM_ENV Messages

PLATFORM_ENV Messages
Error Message PLATFORM_ENV-1-FAN: Faulty fan detected.
Error Message PLATFORM_ENV-1-FAN_NOT_PRESENT: Fan is not present.
Error Message PLATFORM_ENV-1-FRU_PS_ACCESS: [chars].
Error Message PLATFORM_ENV-1-FRU_PS_FAN_FAILED: Power supply fan failure detected.
Error Message PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: [chars] signal on power supply is
faulty.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
2-56
Explanation A faulty fan is detected.
If the message appears again, immediately replace the switch fan.
Recommended Action
The fan is not in the switch.
Explanation
If the fan is removable, remove and replace it into the switch. If the message
Recommended Action
appears again after insertion, replace the fan.
The switch did not access the power supply due to a communication problem. [chars] is
Explanation
the error message.
This problem could be transient. If the message appears again, replace the
Recommended Action
power supply.
A power supply fan failure is detected.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The specified signal of the power supply is faulty. [chars] is the signal value (12V or
Explanation
PoE).
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Chapter 2 Message and Recovery Procedures
1-7.
1-7.
"Error
"Error
OL-9772-05