When You Cannot Print - Xerox 4595 System Administration Manual

9. Tr ou b le s h oo ti n g
Cause
The machine is processing a
request from a different computer.
(Only when the machine is set to
the Non-Spool mode)
The number of connections to the
machine exceeded the maximum
connections allowed.
9- 2

When you cannot print

Check point
Confirm the machine is processing
a print job. (A write error dialog
should be displayed to indicate
that there is no room for the print
queue available.)
Confirm if the machine is
processing simultaneous
processing requests (print
requests, status queries, etc.) from
multiple computers. A write error
dialog should be displayed to
indicate that no more remote
computers can be connected.
X e r o x 4 5 95 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e
Remedy
Wait until the machine finishes
processing the print job, or change
the machine setting to Spool
mode.
Wait for a while and retry printing.