Configuration Of The Scanner (Mail Transmission); Preparations; Overview; Enabling The Ports And Setting The Ip Addresses - Xerox 4595 System Administration Manual

5. U s i ng t h e S c an S e r v i c e

Configuration of the scanner (mail transmission)

Preparations

Overview

Enabling the ports and setting the IP addresses

5- 2
Prepare the following to use the scanner (mail transmission)
function:
• A registered mail account
A mail account for the machine needs to be registered.
This section describes the configuration procedure to use the
scanner (mail transmission) function on the machine.
The following is the procedure to use the scanner (mail
transmission) function:
• Enabling the port and setting TCP/IP
Enable the mail send port and mail receive port, and set IP
addresses on the machine.
• Configuring the E-mail Environment
Set the e-mail function items on the machine.
This section describes the configuration procedure to use TCP/IP
on the machine.
First enable the mail send port, then set IP address on the
machine.
NOTE 1: The configuration can also be performed using
CentreWare Internet Services.
NOTE 2: Enable the SOAP port and the SNMP port in most cases.
Refer to "Using CentreWare Internet Services" on page 3-1.
Display the System Administrator Menu screen.
1.
a. Press the Log In/Out button.
b. Enter the UserID using the numeric keypad and then
select Confirm.
NOTE: The default User ID value is 11111. When using the
Authentication feature, a password is required. The default
password is x-admin.
c. Select System Settings.
X e r o x 4 5 95 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e