Reduce/Enlarge - Xerox 4595 System Administration Manual

8 . S e t ups

Reduce/Enlarge

Select the default setting for Reduce/Enlarge feature on the
Basic Copying screen. Select one of the following magnification
levels as your default R/E option.
The selection made here appears as the default setting on the
Basic Copying tab (Copy feature); refer to the below illustration:
KEY POINT: If the default value for the Reduce/Enlarge feature
is set to Auto%, then you cannot select the Auto option as the
default setting for Paper Supply (refer to is page 84).
For information about R/E Preset buttons, refer to Reduce/Enlarge
Presets page 114.
X er o x 4 5 95 Co pi e r /P r i n te r S y s t em Ad m i ni s t r at i on G ui d e
8-85