Xerox 4595 System Administration Manual page 186

8. S e tu ps
Fault Tone
Auto Clear Alert Tone
Alert Tone
Out of Paper Warning Tone
Low Toner Alert Tone
Stored Programming Tone
8- 2 8
Select the volume level that sounds when there is an error
termination. Select from Loud, Normal, and Soft. To disable the
sound, select Off.
Select the volume level that sounds when the automatic clear
feature is enabled and it is 5 seconds before the machine
automatically returns to the initial screen. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when a fault, such as a paper
jam occurs, and the fault is left unattended. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when there is no paper in the
paper tray and the job is left unattended. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when it is time to replace the
drum toner cartridge. Select from Loud, Normal, and Low. To
disable the sound, select Off.
Select the volume level that sounds while the machine is records a
job into the job memory. Select from Loud, Normal, and Soft.
NOTE: It is not possible to disable this sound.
X e r o x 4 5 95 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e