Xerox 4595 System Administration Manual page 59

X er o x 4 5 95 Co pi e r /P r i n te r S y s t em Ad m i ni s t r at i on G ui d e
Set the Poling Interval.
9.
Set the Number of Searches.
10.
Set the Password.
11.
a. Enter the Password.
b. Re-enter the same password in the Re-enter Password
field.
Select the Enable check box to enable the TBCP Filter.
12.
NOTE: The TBCP Filter checkbox will have a checkmark in it
indicating that the TBCP Filter is enabled.
Set the Tree Name.
13.
Set the Context Name.
14.
NOTE: Set this item only when the operation mode is in
Directory Service.
Select a frame type from the Transport Protocol - Frame
15.
Type pull-down menu.
NOTE: Set this item only when the operation mode is in
Directory Service.
Select the Enable check box to enable SLP - Active
16.
Discovery.
Reflect the values as the machine's setting values.
17.
a. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is
x-admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click Reboot. The machine will reboot and the setting
value will be reflected.
3 . Us i ng Ce nt r eWa r e I nt er n e t Se r v i c e s
3-11