Configuration Of The Job Template; Preparations; Overview - Xerox 4595 System Administration Manual

5. U s i ng t h e S c an S e r v i c e

Configuration of the Job Template

Preparations

Overview

5- 1 6
The following environment is required to use the job template scan
function on the machine:
• Using with FTP
For information on the required FTP server.
• Using with SMB
To use SMB forwarding, your computer should have one of the
following operating systems installed that supports folder
sharing:
– Microsoft WIndows 95/98
– Microsoft WIndows Me
– Microsoft WIndows NT 4.0
– Microsoft WIndows 2000
– Microsoft WIndows Server 2003
– Microsoft WIndows XP
This section describes the configuration procedure to use the job
template scan function on the machine.
The following is the procedure to use the job template scan
function:
• Enabling the port and setting TCP/IP
Enable the SNMP port, Internet service port and FTP port or
SMB port, and set IP addresses on the machine.
• Configuring the SNMP port
Configure the transport protocol for the SNMP port using
CentreWare Internet Services.
X e r o x 4 5 95 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e