Xerox 4595 System Administration Manual page 331

Transfer Protocol
Server Name/IP address
Shared Name (SMB Only)
Save in
Login Name
Password
Port Number
When the Delete All
Settings button is selected
X er o x 4 5 95 Co pi e r /P r i n te r S y s t em Ad m i ni s t r at i on G ui d e
shown as the item name. Input any information as an auxiliary
item, but only with a maximum of sixty characters. This is
appropriate for information represented by a longer character
string, such as company division or address and so forth. For
more about attribute name, refer to Attribute Name of Custom
Items 1 to 3 page 147.
Set the forwarding destination protocol. Select either FTP or
SMB.
Enter the recipient server name or IP address for transmission
destination.
Enter the shared name set for the SMB folder. Enter with the UNC
format.
KEY POINT: Do not start shared names with a backslash (/). If
they start with a backslash (/), the machine will not identify them
when processing job flows.
Enter the directory for storing documents.
• Forwarding via FTP
Example: To save the aaa directory located in the root
directory when you log in into the bbb directory (aaa/bbb).
• Forwarding via SMB
Example: To save the aaa directory with a specified volume
(UNC format) in to the bbb directory (aaa\bbb).
When a login name is required to be input by the forwarding
destination server, set the login name. For the login name, you
can enter a maximum of 32 characters.
When a password is required to be input by the forwarding
destination server, set the password. For the password, you can
enter a maximum of 32 characters.
Set the forwarding destination port number. Input a number in the
range 1 to 65535.
This deletes all registered information for the selected address
book entry. To delete all registered information for the selected
address book entry, select Yes.
KEY POINT: Deleted information cannot be recovered.
8 . S e t ups
8-173