Xerox 4595 System Administration Manual page 199

Auto Size Detect
Variable Size
X er o x 4 5 95 Co pi e r /P r i n te r S y s t em Ad m i ni s t r at i on G ui d e
Standard-sized paper loaded in trays 3, 4, and optional 6 and 7 is
automatically detected.
When setting a non-standard size for trays 3 and 4, set the size in
the X (horizontal) direction within the range of 182-488 mm (7.17-
19.21 in.) and in the Y (vertical) direction within the range 148-330
mm (5.82-13 in.) in 1 mm increments. For optional trays 6 and 7,
set the size in the X direction within the range 210-241 mm (8.26-
9.48 in.) and in the Y direction within the range 297-330 mm
(11.69-12 in.) in 1 mm increments.
b. From the Paper Size screen, select Save to save the
paper size and return to previous screen.
Select either Paper Type or Save.
5.
• If you select Save, you are returned to the Paper Tray
Attributes screen. Proceed to Step 7.
• If you select Paper Type, proceed to the next step.
8 . S e t ups
8-41