Xerox 4595 System Administration Manual page 62

3. U s i ng C e nt r eWa r e I nt er n e t S er v i c e s
3- 1 4
Set the Access Control List information.
12.
a. Select the Enable check box.
b. Click the Edit button. A screen to enter the user name and
password will be displayed.
c. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
d. Set the IP Filter.
e. Set the IP Address Mask.
f. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
g. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is
x-admin.
h. The right frame on the web browser will change to the
machine reboot display.
i. Click the Back button until the TCP/IP Settings screen is
displayed.
Reflect the values as the machine's setting values.
13.
a. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is
x-admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click Reboot. The machine will reboot and the setting
value will be reflected.
X e r o x 4 5 95 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e