Configuring The Snmp Port - Xerox 4595 System Administration Manual

Configuring the SNMP port

X er o x 4 5 95 Co pi e r /P r i n te r S y s t em Ad m i ni s t r at i on G ui d e
Select Close repeatedly until the System Settings screen is
6.
displayed.
Select Exit.
7.
After the machine is restarted, print out the Printer Settings
8.
List to confirm that the ports are enabled and TCP/IP is
configured.
Configure the transport protocol for the SNMP port using
CentreWare Internet Services.
1. Start a web browser.
Enter the machine's IP address or the Internet address to the
2.
address entry column on the browser, and press the Enter key.
• Example of the IP address entry:
http://192.168.1.1/
• Example of the Internet address entry:
http://xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
Click the Properties tab.
3.
Click Port Status from the Properties area.
4.
Select the UDP checkbox to the right of SNMP (Port Status
5.
feature).
Reflect the values as the setting values of the machine.
6.
a. Click the Apply New Settings.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is x-
admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click Reboot. The machine will reboot and the setting
value will be reflected.
5 . Us i n g th e S c a n Se r v i c e
5-19