3. U s i ng C e nt r eWa r e I nt er n e t S er v i c e s
Ethernet
3- 6
This section describes the settings for the Ethernet interface.
Start a web browser.
1.
Type the IP address or the Internet address for the machine in
2.
the address bar on the browser, and press the Enter key.
•
Example of the IP address entry: http://192.168.1.1/
•
Example of the Internet address entry: http://
xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
Click the Properties tab.
3.
Click + on the left of Port Settings to display the items in the
4.
folder.
Click Ethernet.
5.
Set the communication speed for the Ethernet interface using
6.
the Ethernet Settings pull-down menu.
Save the selection as the machine's default setting.
7.
a. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is
x-admin.
c. The web browser pages displays a message asking if you
want to reboot the machine.
d. Click Reboot. The machine will reboot and the setting
value will be reflected.
X e r o x 4 5 95 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e