Selecting the feature defaults
G The screen on the right is when the
Auditron feature is enabled. See
Chapter 9 Using the Auditron
Feature for details.
Configuring the Machine with
Tools Mode
This section uses the three examples described below to explain the
procedures for configuring Tools Mode.
Selecting the feature defaults
G
Changing the access number of the administrator
G
Configuring a screen (default/basic/customised)
G
This section describes the procedures for selecting the feature defaults.
The example here is to change the default copy density to Darkest.
Procedure
Procedure
Press Settings/Meter Check.
Select Tools Mode.
G
Custom Presets
6-3 Configuring the Machine with Tools Mode
G
6
155