Auto Repeater Function; D Frequency Range And Offset Direction - Icom ID-31A Advanced Instructions

Previous view
1
REPEATER AND DUPLEX OPERATIONS

■ Auto repeater function

When the operating frequency falls within the repeater
output frequency range, the Auto Repeater function
can automatically sets the repeater settings (duplex
ON/OFF, duplex direction, tone encoder ON/OFF).
The Auto repeater function uses the preset repeater
tone frequency and frequency offset. See page 10-2
for details of the setting.

D Frequency range and offset direction

• U.S.A. version
FREQUENCY RANGE
442.000–444.995 MHz
447.000–449.995 MHz
• Korean version
FREQUENCY RANGE
439.000–440.000 MHz
Push D-pad( ) to select the root item ("Function"),
q
and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Auto Repeater," and then
w
push D-pad(Ent).
Rotate [DIAL] to select the Auto repeater setting.
e
U.S.A. version:
• OFF
• ON (DUP)
• ON (DUP, TONE) : Turns ON the duplex operation and
Korean version:
• OFF
• ON
Push [MENU]
r
screen.
NOTE:
When turned ON, the Auto repeater function uses
the preset repeater tone frequency and frequency
offset. See page 10-2 for details of the setting.
For the U.S.A. and Korean versions:
When turned ON, the Auto repeater function has pri-
ority over the manual duplex setting. If the transmit
frequency changes after setting, the Auto repeater
function may have changed the duplex setting.
SHIFT DIRECTION
"DUP+" is set
"DUP–" is set
SHIFT DIRECTION
"DUP–" is set
: The Auto repeater function is OFF.
: Turns ON only the duplex operation.
(Default)
tone encoder
: The Auto repeater function is OFF.
: Turns ON the duplex operation and
tone encoder. (Default)
to save and exit the [MENU]
1-6
[DIAL]