Speech Items - Icom ID-31A Advanced Instructions

Previous view

■ SPEECH items

RX Call Sign SPEECH
SPEECH > RX Call Sign SPEECH(RX CALL SIGN SPEECH)
Turn the RX call sign speech function ON or OFF.
• OFF : No announcement is made even when a call is received.
• ON (Kerchunk) : The calling station's call sign is announced only when it
makes a short transmission.
• ON (All) : The calling station's call sign is always announced.
RX>CS SPEECH
SPEECH > RX>CS SPEECH(RX>CS SPEECH)
Turn the RX>CS Speech function ON or OFF.
The RX>CS Speech function enables the transceiver to announce the sta-
tion call sign that is selected from a Received Call Record by using
and [DIAL].
• OFF : The station call sign is not announced.
• ON : The station call sign is announced.
Procedure : While holding down
from a Received Call Record. After selecting, release
and then the selected station call sign is announced.
SPEECH Language
SPEECH > SPEECH Language(SPEECH LANGUAGE)
Set the desired speech pronunciation to English or Japanese.
Alphabet
SPEECH > Alphabet(ALPHABET)
Select either "Normal" or "Phonetic Code" to announce the alphabet char-
acter.
• Normal : Normal code is used. (for example: A as eh, B as bee)
• Phonetic Code : Phonetic code is used. (for example: A as Alfa, B as
Bravo)
SPEECH Speed
SPEECH > SPEECH Speed(SPEECH SPEED)
Set the speech speed to Low (slow) or High (fast).
SPEECH Level
SPEECH > SPEECH Level(SPEECH LEVEL)
Enter a volume level number between 0 (OFF), 1 (minimum) and 9 (maxi-
mum) for the voice synthesizer.
The voice synthesizer audio output level from the speaker is linked with
[VOL] setting from the minimum audio volume up to the set level.
10-49
MENU SCREEN OPERATION
(Default: ON (Kerchunk))
(Default: ON)
, rotate [DIAL] to select a call sign
(Default: English)
(Default: Normal)
(Default: Fast)
10
,
10
(Default: 7)