Dgps Alarm Setting - Icom ID-31A Advanced Instructions

Previous view
5
GPS/GPS-A OPERATION
GPS memory operation
■
D GPS alarm setting
A GPS alarm can sound when a target position comes
into the alarm area.
This function can be set to the caller station, all GPS
Memory channels, a specified Memory bank or a
specified Memory channel.
Alarm area 1 (Setting plural stations)
When all channels or bank is selected:
Point A
Your
position
Point B
Example: Alarm Area 1
Setting alarm to all GPS Memories.
Push [MENU]
q
Push D-pad( ) to select the root item (GPS), and
w
then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "GPS Memory," and then
e
push D-pad(Ent).
Push D-pad( ) to select "ALL."
r

• If you wish to set the alarm to a GPS Memory
bank, select one between A to Z.
Push .
t
Push D-pad( ) to select "Alarm ON," and then push
y 
D-pad(Ent).
• When the alarm is set,
item.
u Push [MENU]
• When either one of the stations in a specified group
enters its set range, the beep sounds three times.
• When the GPS alarm beeps, "GPS ALARM" pops
up on the screen and then the S icon blinks.
• To cancel the GPS alarm, repeat step t and se-
lect "Alarm OFF."
NOTE:
When "ALL" or a memory bank is selected, the
alarm functions depend on the "Alarm Area1" setting in
the Menu screen. (p. 10-24)
(MENU > GPS > GPS Set > Alarm Area 1)
(Continued)
0.25' 0.25'
Point C
Beeps three times
.
is displayed next to the
to exit the Menu screen.
Alarm area 2 (Setting specific stations)
When a specified memory is selected:
N
Your
position
Beeps one times
•
GPS Alarm beeping screen
5-14
Extended range
(approx. 1 km; 1094 Y)
Limited range
(approx. 500m; 547Y)
Beeps three times
When alarm
is set,
displayed.
S
blinks
The pop up is
displayed and
beeps 3 times.
is