Adding Or Editing Gps Memory; Dgps Memory; D Add A Gps Memory - Icom ID-31A Advanced Instructions

Previous view
5
GPS/GPS-A OPERATION

Adding or editing GPS memory

■
D GPS Memory
You can add GPS data to GPS Memory.
You can add the your own position, other station's po-
sition or any positions that are manually programmed.
Also, an alarm can be set to GPS Memory to sound,
depending on the distance from your station.
The GPS Memory is capable of storing a total of 100
channels in a "ALL" folder, or conveniently stored in
up to 26 banks, from A to Z. The banks can also be
named. (p. 7-10)

D Add a GPS memory

1. Adding GPS Memory and entering the edit
mode
q Push [MENU]
w Push D-pad() and D-pad(Ent) to select "GPS," and
then select "GPS Memory."
D-pad
(Ent)
(�)
e Push D-pad() to select "ALL," and then push D-
pad(Ent).
• All the previously added GPS memories are dis-
played.
r Push .
t Push D-pad() to select "Add," and then push D-
pad(Ent).
• GPS MEMORY EDIT screen is displayed.
(Continued on the next page)
Editing the assigned data:
q Select "Edit" by pushing D-pad(Ent), as illustrated
to the right while the desired bank is selected.
w Select the desired data, then the editing screen is
displayed.
e When the desired editing is completed, push
r Select "Overwrite," then select "YES." The editing is
completed.
.
.
5-8
GPS
MEMORY
screen is
displayed.
Select "Add"
Select "Edit," and
then push D-pad
(Ent).
Select "Overwrite"
then "YES," and
then push D-pad
(Ent).