Dgps Bank Name Programming - Icom ID-31A Advanced Instructions

Previous view
5
GPS/GPS-A OPERATION
GPS memory operation
■
D GPS bank name programming
You can program the name of each GPS bank.
Push [MENU]
q
Push D-pad( ) to select the root item (GPS), and
w
then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "GPS Memory," and then
e
push D-pad(Ent).
Push D-pad( ) to select the desired bank to edit
r
its name.
Push .
t
Push D-pad( ), then push D-pad(Ent) to select
y
"Edit Name."
The bank name editing screen appears.
u
Rotate [DIAL] to select the first character.
i
• The selected character blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
character to a upper case or lower case letter.
• While selecting a digit, push
selection window.
Push D-pad() to select the desired modes to Upper
case letters, Lower case letters, Numbers and Symbols.
To enter symbols, select "!"#," and then push D-pad(Ent)
to display the symbol character selection window. And
rotate [DIAL] to select the desired symbol character, and
then push D-pad(Ent).
• A space can be selected, even for any input mode se-
lected.
• Push D-pad(") to enter a space to the right of the last
character.
To insert a space to the left of any selected character,
rotate [DIAL] to select a space to insert it.
• Push [CLR] to erase the selected character, or hold
down [CLR]
after the cursor.
Push D-pad( ") to move the cursor to the second
o
digit.
!0 Repeat steps i and o to enter a bank name of up
to 16 characters, including a space.
!1 After entering the name, push D-pad(Ent).
(Continued)
.
to change the
to open the input mode
to continuously erase the characters
5-12
GPS MEMORY
screen
Select "Edit
Name"
Bank name
editing
screen
Character
type selection
screen
(Example)
When bank
name is pro-
grammed as
"TOKYO" .