Auto Repeater Function; Frequency Range And Offset Direction - Icom i2730A Instruction Manual

■ Auto repeater function

When the operating frequency falls within the repeater output
frequency range, the Auto Repeater function automatically
sets the repeater settings (duplex ON/OFF, duplex direction,
tone encoder ON/OFF).
The Auto repeater function uses the preset repeater tone fre-
quency and frequency offset.
Enters the MENU mode. (p. 11)
q
w Rotate [DIAL]S to select "AUTORP" (Auto Repeater).
(MENU-EXMENU > EXMEN-FUNC > FUNC-AUTORP)
e Rotate [DIAL]S to select a desired option to turn ON the
Auto Repeater function.
USA version:
• OFF: The Auto repeater function is OFF.
• DUP: Turns ON only the duplex operation. (Default)
• DUP.TONE: Turns ON the duplex operation and tone encoder
Korean version:
• OFF: The Auto repeater function is OFF.
• ON: Turns ON the duplex operation and tone encoder.
(Default)
Push [ ï]D.
t
• Sets the selected option, and goes back to the previous tree
level.
Push [MAIN BAND]
y S.
• Exits the MENU mode.
REPEATER AND DUPLEX OPERATIONS
For the U.S.A. and Korean versions:
When turned ON, the Auto repeater function has priority
over the manual duplex setting. If the transmit frequency
changes after setting, the Auto repeater function may have
changed the duplex setting.
D Frequency range and offset direction
• U.S.A. version
FREQUENCY RANGE SHIFT DIRECTION
145.200–145.495 MHz "DUP–" is set
146.610–146.995 MHz "DUP–" is set
147.000–147.395 MHz "DUP+" is set
442.000–444.995 MHz "DUP+" is set
447.000–449.995 MHz "DUP–" is set
• Korean version
FREQUENCY RANGE SHIFT DIRECTION
439.000–440.000 MHz "DUP–" is set
7
7
52