Previous view
11
OTHER FUNCTIONS
■ CI-V information
D
CI-V data setting
Set the ID-31A/E's address, data transferring speed
and transceive function. See page 10-56 for setting the
CI-V condition using the MENU list screen.
Function > CI-V
D
CI-V connection example
The transceiver can be connected through an optional
CT-17
-
ci
v level converter
RS-232C port.
The Icom Communications Interface-V (CI-V) controls
the transceiver.
Up to 4 Icom CI-V transceivers or receivers can be
connected to the PC.
See the CT-17 instruction manual for details of remote-
ly control a transceiver or receiver.
* Use the cable described at right. No received audio is heard
when the supplied control cable, coming with CT-17, is used
for the connection.
D Data format
The CI-V system can be operated using the following
data formats. Data formats differ depending on com-
mand numbers. A data area or sub command is added
to some commands.
Controller to ID-31A/E
q
w
FE FE
84
E0
FE FE
E0
q
w
ID-31A/E to controller
to a PC equipped with an
e
r
t
y
Cn
Sc
Data area
84
Cn
Sc
Data area
e
r
t
y
3-conductor 3.5(d) mm
plug must be used.
ID-31A/E
¡Connections (ID-31A/E side)
3.5(d)mm
*No speaker is necessary for the CT-17 side.
u
FD
FD
u
11-16
9V 15VDC
RS-232C
cable
CT-17
2-conductor 3.5(d) mm
plug must be used.
SP
SP
GND
I/O
personal
computer
GND
SP
I/O