D Transmit Frequency Monitor Check; D Auto Repeater Function (Usa Version Only) - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT
D
You may be able to receive the other party's transmit
without having to go through a repeater.
Transmit frequency monitor check (XFC) allows you
to check this.
[MENU/GRP]
q Select M-1.
[MENU/GRP] for 1 second once or twice
to select the menu group M.
[MENU/GRP] momentarily one or more times
to select the menu M-1.
w While receiving, hold down [F-4 XFC] to see if
you can receive the other party's transmit signal
directly.
and frequency are displayed above the multi-function
key indicator.
D
This function automatically activates the repeater
settings (DUP– or DUP+ and/or tone encoder ON/
OFF) when the operating frequency falls within
the general repeater output frequency range and
deactivates them when outside of the range.
Set the auto repeater function ON-1 (auto duplex
setting) or ON-2 (auto duplex setting and activating
tone encoder) in the miscellaneous (others) Set
mode in advance (p. 130). When ON-1 or ON-2
are turned on, repeater settings are automatically
activated according to the table below right.
ON-1 sets the duplex setting and ON-2 sets the
duplex setting and tone encoder automatically.
q Push [AF(
SET )] momentarily to enter the Set
mode menu.
w Push [F-4 OTH] to enter the miscellaneous
(others) Set mode.
e P u s h [ F - 1 ≤ ] o r [ F - 2 ≥ ] t o s e l e c t " A u t o
Repeater."
r Rotate [DIAL] to select the desired auto repeater
condition from ON-1, ON-2 and OFF.
[F-4 DEF] for 1 second to return to default
setting.
t Push [Z(
MENU/GRP
operating mode.
65
[F-4]
[F-4 XFC], the offset direction
)] twice to return to the normal
SPCH TUNER
/LOCK /CALL
V/M
F-1
1.8 3.5 7
1 2
10 14 18
4 5
21 24 28
7 8
50 144 430
.
0
[AF]
[MENU/GRP] [F-1] [F-2] [F-4]
FREQUENCY RANGE
51.620–51.999999 MHz
52.500–52.999999 MHz
53.500–53.999999 MHz
145.200–145.499999 MHz
146.610–146.999999 MHz
147.000–147.399999 MHz
442.000–444.999999 MHz
447.000–449.999999 MHz
XFC XFC
MW
F-2
MODE
3
FIL
6
GENE
9
F-INP
CE ENT
HM-151
[DIAL]
DUPLEX DIRECTION
minus duplex
minus duplex
plus duplex
plus duplex
minus duplex