Memory Bank Setting; D Assigning A Memory Channel To A Memory Bank - Icom ID-31A Advanced Instructions

Previous view

■ Memory bank setting

The ID-31A/E has a total of 26 banks (A ~ Z).
Regular memory channels 0 to 499 are assigned to
any desired bank for easy memory management. Up
to 100 channels can be assigned to a bank.
D Assigning a memory channel to a mem-
ory bank
Push [M/CALL]
q
Memory mode, and then rotate [DIAL] to select a
desired channel to be assigned to a bank.
Hold down [S.MW]
w
Select Memory write mode.
• 1 short and 1 long beep sounds.
• The memory channel number blinks.
• DO NOT hold down [S.MW]
onds. Otherwise the memory contents will be copied to
the VFO.
Push to open the Quick Menu screen.
e
Push D-pad( ) to select "Edit."
r
Push D-pad(Ent) to enter the Memory bank edit
t
mode.
Push D-pad( ) to select "BANK," and then push D-
y
pad(Ent).
• "– – – –" appears, then the first digit blinks.
• If the selected memory channel has already been as-
signed to a bank, the Bank group and channel number
are displayed.
• If the Bank name has already been programmed, it is
also displayed.
Rotate [DIAL] to select a desired bank group, "A"
u
to "Z."
Push D-pad( ") to select the bank channel digit.
i
Rotate [DIAL] to select a desired bank channel num-
o
ber between "00" and "99."
• A memory channel assigned to another Bank channel is
not displayed.
• Push D-pad() to change the bank group or bank chan-
nel number.
!0 Push D-pad(Ent) to exit the Memory bank edit
mode.
!1 Push D-pad() to select "<<Write>>," and then
push D-pad(Ent).
• The confirmation screen "Overwrite?" appears.
!2 Push D-pad() to select "YES," and then push
D-pad(Ent).
• The selected memory channel is updated and assigned
to the bank, and then the transceiver returns to the
Memory mode.
once or twice to select the
for 1 second to enter the
for more than 2 sec-
MEMORY CHANNEL PROGRAMMING
NOTE: The memory banks are only used to hold
memory channels. Thus if the original memory
channel contents have been changed, the memory
bank contents are also changed at the same time.
Push D-pad(Ent) and returns to
the Memory Mode.
7-7
7
Hold down [S.MW]
for 1 second to enter
the Select Memory write
mode.
Push D-pad() to se-
lect "Edit."
Push D-pad() to select
"BANK," and then push
D-pad(Ent).
The first digit blinks.
Rotate [DIAL] and select
"F", then push .
Rotate [DIAL] and select
"05", then push D-pad
(Ent).
Select "<<Write>>,"
and then push D-
pad(Ent).
Push D-pad() to
select "YES."
7