D Memory Or Call Channel  Another Memory Or Call Channel - Icom ID-31A Advanced Instructions

Previous view
7
MEMORY CHANNEL PROGRAMMING
Copying memory and Call channel contents
■
D Memory or Call channelAnother mem-
ory or Call channel
Select the memory or call channel to be copied.
q
Push [M/CALL]
➥
Memory mode or the Call channel mode, then
rotate [DIAL] to select a desired channel.
Hold down [S.MW]
w
Select Memory write mode.
• 1 short and 1 long beep sounds.
• The memory channel number blinks.
• DO NOT hold down [S.MW]
onds. If you do, the memory contents will be copied to
the VFO.
Rotate [DIAL] to select the target memory or Call
e
channel.
Hold down [S.MW]
r
(Continued)
once or twice to select the
for 1 second to enter the
for more than 2 sec-
for 1 second again to copy.
[DIAL]
7-6
Select the memory
channel to be copied.
Hold down [S.MW]
for 1 second to enter
the Select Memory
write mode.
Rotate [DIAL] to select
the channel.
Hold down [S.MW]
for 1 second again to
copy.