Setting And Clearing Skip Channel - Icom ID-31A Advanced Instructions

Previous view
8
SCAN OPERATION
■ Setting and clearing skip
channel
The channels set as "SKIP" skip channels are skipped
(not scanned).
Push [M/CALL]
q
Rotate [DIAL] to select the memory channel to be
w
set as a skip channel.
Push .
e
Push D-pad( ) to select "SKIP," and then push
r

D-pad(Ent).
• OFF : Cancel the skip setting.
• SKIP : Skipped during a memory scan.
• PSKIP : Skipped during both VFO and memory
scans.
D-pad
(Ent)
(�)
To cancel the skip, D-pad(
t
then push D-pad(Ent) to save the selection.
• The skip is set or cleared.
to select the memory mode.
) to select "OFF," and

[DIAL]
Example: Set "SKIP" to bank channel "Z98."
8-10
Rotate [DIAL] to select the
memory channel.
Push .
Memory channel number
Push D-pad(Ent).
"SKIP" is set.