Icom ID-31A Advanced Instructions page 187

Previous view
9
PRIORITY WATCH
DR MODE SCAN AND MEMORY CHANNEL (Continued)
■
When a signal is received.
• When "ON" is selected.
When a signal is received on the priority channel,
the memory mode is automatically selected. The
"PRIO" icon blinks.
Push [CLR]
it again to cancel the scan.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "PRIO" icon blinks. The DR
mode scan resumes.
to resume the priority scan. Push
Automatically changes to the memory channel mode.
Blinks
Resumes in the DR mode.
9-34
Blinks
Blinks