D Message Transmission - Icom ID-31A Advanced Instructions

Previous view

D Message Transmission

You can select a TX message to turn ON the message
transmission function. When a TX message is select-
ed, and [PTT] is pushed, the transceiver transmits the
preprogrammed text message.
Push [MENU]
q
Push D-pad( ) to select the root item ("My Station"),
w 
and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "TX Message," and then
e 
push D-pad(Ent).
Push D-pad( ) to select message memory number
r 
1 to 5.
• To turn OFF the message transmission function, select
"OFF."
t After selecting, push D-pad(Ent).
Push [MENU]
y
• The message is transmitted with a voice signal.
• The message is transmitted each time you push [PTT].
• The message is automatically transmitted every 30 sec-
onds during continuous transmission.
RX message display function
As the default, the received message is automatically
displayed and scrolled on the LCD.
To not display and scroll the received message, turn
OFF the RX message display function in "RX Mes-
sage" of the MENU screen. (p. 10-58)
(MENU > Display > RX Message)
.
to exit the MENU screen.
DR MODE <ADVANCED>
4-3
4
1
2
3
4
5
6
7
8
9
10
11
12
13
The received mes-
sage is displayed 14
and scrolled here.
15
16
17
18
19
20
21