Gps Indicator; Position Format - Icom ID-31A Advanced Instructions

Previous view
Manual Position
(Default: LATITUDE : 0°00'00"N LONGITUDE :
GPS > GPS Set > Manual Position(MANUAL POSITION)
Manually enter the latitude, longitude and Altitude of your current position.
The received position data can be captured by selecting "Capture From GPS"
when position data is received from either the internal or an external GPS. (p.
5-2)

GPS Indicator

GPS > GPS Set > GPS Indicator(GPS INDICATOR)
Select whether or not to display the GPS icon(
• OFF : The GPS icon is not displayed.
• ON : The GPS icon appears
blinks when no position data is received.
Selected GPS
receiver
Internal GPS
External GPS
*No icon appears when "Manual" is selected in the GPS select item.

Position Format

GPS > GPS Set > Position Format(POSITION FORMAT)
Select either the ddd°mm.mm' or ddd°mm'ss" format to display position
information.
Altitude/Distance Units
GPS > GPS Set > Altitude/Distance Units(ALT/DST UNITS)
Select either the meter or feet/mile format to display the distance and el-
evation.
*The default setting is differ, depending on the version.
Speed Units
GPS > GPS Set > Speed Units(SPEED UNITS)
Select between either the km/h, mph or knots format to display the speed.
*The default setting is differ, depending on the version.
10-23
MENU SCREEN OPERATION
0°00'00"E ALTITUDE : ------m)
).
when valid position data is received, and
*
Connected/
Not connected
Searching
– Blinks
Not displayed Blinks
(Default: ddd°mm.mm')
10
(Default: ON)
Connected/
Received
Appears
Appears
10
(Default: ft/ml*)
(Default: mph*)