Table of Contents
Advertisement
4. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER (OPTIONAL)
The optional Reversing Automatic Document Feeder automatically feeds and copies sheet
paper originals placed on the feeding tray one at a time. This is called the "continuous feed
mode." You can also manually feed originals in one sheet at a time. This is called the "single
feed mode." If you feed in two-sided originals, this document feeder automatically reverses
originals after they have been copied so that their reverse sides can be copied.
Precautions When Feeding Originals
1
Use originals with a paper weight in the range of 17 to 24 lb.
2
The number of the originals you can set up at a time differs depending on their size.
3
Do not use the following types of originals as they tend to misfeed or become damaged
in the reversing automatic document feeder:
(1) Badly wrinkled or folded originals. In
particular, originals
whose leading edge
is curled may be
misfed.
(2) Carbon paper
(3) Taped originals
4
Folded or curled originals should be smoothed out before
being set on the reversing automatic document feeder.
5
Do not mix originals of different widths at the same time.
6
If the surface of the originals is so rough that they cannot
be moved when two of them are pinched between two
fingertips, or if the surface has been processed, these
originals could not be used because the automatic
document feeder may not be able to separate them.
24
Letter, Letter-R, Statement
Legal, Comp
Ledger
50
35
25
(4) Clipped or stapled originals
(5) Torn originals (including those with holes
in them)
(6) Damp originals
(7) OHP film originals
Advertisement
Table of Contents
