Borderless Printing At Actual Size (Mac Os) - Canon imagePROGRAF iPF8400S User Manual

iPF8400S
13
C
In Borderless Printing Method, click
14
Confirm the print settings and print as desired.
• For tips on confirming print settings, see "Confirming Print Settings ."
Note

Borderless Printing at Actual Size (Mac OS)

Borderless Printing at Actual Size (Mac OS)
This topic describes how to print borderlessly at actual size based on the following example.
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings dialog box. In
Important
this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the
upper and lower bands with scissors.
Document: Any type
•
Page size: 10 × 12 inches (254.0×304.8 mm)–Borderless
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
•
1
Choose Page Setup from the application menu to display the Page Attributes dialog box.
The configuration method varies depending on the OS and
•
application software you are using.
Note
If Page Setup is displayed in the application menu, the set-
tings are configured by opening the Page Attributes dialog
box from Page Setup.
If it is not displayed, the settings are configured in the upper
part of the printer driver displayed when you select Print from
the application software menu.
2
Select the printer in the
3
C
In the Paper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Border-
less.
• Paper sizes supported for borderless printing are indicated by -Borderless.
Note
4
F
Click OK to close the dialog box.
User's Guide
F
Print Image with Actual Size.
B
Format for list.
Borderless Printing at Actual Size (Mac OS)
P.164
➔
85