The Printer Stops During A Print Job; An Error Message Is Shown On The Display Screen; The Printer Ejects Blank, Unprinted Paper - Canon imagePROGRAF iPF8400S User Manual

iPF8400S

The printer stops during a print job

The printer stops during a print job

An error message is shown on the Display Screen ............................................................................................... 933

The printer ejects blank, unprinted paper .................................................................................................................. 933

An error message is shown on the Display Screen An error message is shown on the Display Screen
The last portion of roll paper was used during a print job, and paper could not be ad-
vanced because the trailing edge is taped to the roll.
The printer ejects blank, unprinted paper The printer ejects blank, unprinted paper
Cause
The leading edge of the roll paper was
cut to straighten it.
The Printhead nozzles are clogged.
A print job was received from an incom-
patible printer driver.
The printer is damaged.
User's Guide
Cause
The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other than
Off in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
Print a test pattern to check the nozzles and make sure the Printhead is in good condition for print-
ing.
(See "Checking for Nozzle Clogging.")
Use the correct imagePROGRAF printer driver for the printer and try printing again.
Contact your Canon dealer for assistance.
An error message is shown on the Display Screen
Corrective Action
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
(See "Loading and Printing on Rolls.")
Corrective Action
P.530
➔
P.884
➔
P.517
➔
P.519
➔
P.22
➔
933