Resizing Originals To Fit The Roll Width (Mac Os) - Canon imagePROGRAF iPF8400S User Manual

iPF8400S
9
C
Select the Enlarged/Reduced Printing check box.
C
• If the
played on the Page Setup sheet, clear the
Note
Printing check box.
10
E
Click Fit Roll Paper Width.
• After you click
the Roll Paper Width list and click OK.
Note
• Make sure the roll paper width you specify matches the width of the loaded roll.
11
Confirm the print settings and print as desired.
• For tips on confirming print settings, see "Confirming Print Settings ."
Note

Resizing Originals to Fit the Roll Width (Mac OS)

Resizing Originals to Fit the Roll Width (Mac OS)

This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: 16 inches (406.4 mm)
•
User's Guide
Enlarged/Reduced Printing check box is not dis-
E
Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the loaded roll in
B
Borderless
P.164
➔
Resizing Originals to Fit the Roll Width (Mac OS)
69