Starting From Photoshop - Canon imagePROGRAF iPF8400S User Manual

iPF8400S
3.
Select Canon iPFxxxx Series Print Plug-In for Digital Photo Professional, then click Change/Remove.
iPFxxxx is the name of your printer.
•
Note
• Uninstalling the Layout Plug-In
1.
Select Control Panel from the start menu.
2.
Select Programs and Features.
3.
Select imagePROGRAF Layout Plug-In, and then click the Change/Remove button.

Starting from Photoshop

Starting from Photoshop

Follow the procedure below to start the Print Plug-In for Photoshop from Photoshop.
1
Start Photoshop.
2
Open the image that you wish to print.
3
If required, select the print range.
• Images for use with Print Plug-In for Photoshop are less than 60,000 pixels in width and height. Reduce the selec-
tion range or reduce the image with processing for images more than 60,000 pixels in width and height, and then
Note
attempt step 3.
4
Select Export (or Data Export) from the File menu and
then select the output plug-in that matches your printer.
The imagePROGRAF Print Plug-In for Photoshop win-
dow (known below as the Print Plug-In window) is dis-
played.
• When a profile is created with a commercially available profile creation tool, it may be created in ICCv4 format.
When an image source profile is ICCv4, you must install AdobeCMM or use Print Plug-In in a Windows Vista or
Important
later environment.
When Adobe CMM is not installed in a Windows XP environment, a message is displayed, and the source profile
changes to Adobe RGB. To use an ICCv4 profile in a Windows XP environment, exit Plug-In and then install Adobe
CMM. For details on installing Adobe CMM, refer to "Using Adobe CMM"
User's Guide
Starting from Photoshop
.
P.278
➔
245