Turn On The Media Take-Up Unit; Borderless Printng Not Possible; Paper Position Not Suitable For Borderless Printing - Canon imagePROGRAF iPF8400S User Manual

Turn on the media take-up unit.

The Take-up Reel setting in the printer Set./Adj. Menu was
changed from Enable to Disable, but a print job was re-
ceived before the roll was removed.
Turn on the media take-up unit.
Turn on the media take-up unit.
The Take-up Reel setting in the control panel menu was changed to Enable while the power to the
Take-up Reel was off and the Roll Media lamp on the control panel was lit.

Borderless printng not possible.

Borderless printng not possible.
Cause
The print job received specifies a type
or width of paper that is not compati-
ble with borderless printing.
The loaded paper is a size not com-
patible with borderless printing.
Because paper expands or contracts
depending on the environment of use,
it may become narrower or wider than
the supported width for borderless
printing.

Paper position not suitable for borderless printing.

Paper position not suitable for borderless printing.
Cause
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become narrow-
er or wider than the supported width
964
for borderless printing.
The paper is loaded askew.
Cause
Cause
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2.
Replace the paper with paper compatible for borderless printing.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Use each type of paper only where the recommended environmental conditions are met. For details on
environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental conditions are met. For details on
environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Change Paper and straighten the paper so that the edges are between the ink
grooves for borderless printing.
Corrective Action
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
Corrective Action
P.501
➔
P.517
➔
P.519
➔
P.507
➔
P.510
➔
P.501
➔
P.501
➔
Corrective Action
P.501
➔
iPF8400S
Corrective Action
Turn the Media Take-up Unit on.
The Take-up Reel setting in the control
panel menu changes to Disable.
}
}
User's Guide