Network Environment - Canon imagePROGRAF iPF8400S User Manual

Network Environment

Network Environment
Network Environment
Network Environment
Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
• Printing over a TCP/IP network (when using IPv4)
Compatible operating systems
•
Windows XP
•
Windows Server 2003
•
Windows Vista
•
Windows Server 2008
•
Windows 7
•
Windows 8
•
Windows Server 2003 x64
•
Windows Vista x64
•
Windows Server 2008 x64
•
Windows Server 2012 x64
•
Windows 7 x64
•
Windows 8 x64
•
Mac OS X v10.2.8 or later
•
Unix （ Solaris 9）
•
Unix （ Red Hat 9）
•
• Printing over a TCP/IP network (when using IPv6)
Compatible operating systems
•
Windows Vista
•
Windows Server 2008
•
Windows 7
•
Windows 8
•
Windows Vista x64
•
Windows Server 2008 x64
•
Windows Server 2012 x64
•
Windows 7 x64
•
Windows 8 x64
•
Mac OS X v10.3.8 or later
•
• When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, "Configuring TCP/IPv6
Network Settings"
Note
• The imagePROGRAF printer driver is supported in Mac OS X v10.6.8 or later.
• The imagePROGRAF printer driver is not compatible with Unix.
• Printing over an AppleTalk network
Compatible operating systems
•
Mac OS X v10.2.8–10.4
•
674
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
Note
• The imagePROGRAF printer driver is not compatible with AppleTalk.
or see "Configuring the Printer's TCP/IP Network Settings With RemoteUI."
P.682
➔
iPF8400S
P.683
➔
User's Guide