Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF8400S User Manual

iPF8400S
Mac OS
1
Choose Print in the application menu.
2
Select the Main pane and click
3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
D
Pages and Between Scans in
then click OK.
(See "Paper Detailed Settings Dialog Box (Mac
OS).")
P.354
➔

Specifying the Cutting Method for Rolls

Specifying the Cutting Method for Rolls

How rolls are cut after ejection varies depending on printer settings.
Automatic The roll is automatically cut by the Cutter Unit following
printer driver settings.
Eject (when Select this to move the cutter by key operation and cut
paper. Although there are cases with Automatic in
the paper
surface is which the paper falls and the paper surface is scratched
being when the paper rubs the Output Stacker, you can avoid
damaging the paper with this method since you can cut
scratched /
to wait for by holding the paper with your hand so that the paper
ink to dry) does not fall when cutting, Also, since you can cut while
visually confirming the drying of the ink, you can avoid
ejecting paper before the ink has dried.
User's Guide
C
Settings in
C
Between
B
Drying Time, and
Cutting Method
A
Media Type.
Printer Setting
Media Automatic
Menu > Pa-
per Details
Eject
> (Various
Types of
Paper) >
Cutting
Mode
Specifying the Cutting Method for Rolls
Driver Setting
Auto Cut Yes
(See "Cut-
ting Roll Pa-
Yes
per After
Print-
ing.")
P.155
➔
523