Clearing Jammed Roll Paper
Problems Regarding Paper
Problems Regarding Paper
Clearing Jammed Roll Paper ............................................................................................................................................ 922
Clearing a Jammed Sheet .................................................................................................................................................. 925
Roll paper cannot be inserted into the paper feed slot ....................................................................................... 928
Cannot load sheets ............................................................................................................................................................... 928
Paper is not cut straight .................................................................................................................................................... 929
Paper is not cut ...................................................................................................................................................................... 929
The media take-up unit continues rotating ................................................................................................................ 929
The size of clear film cannot be detected .................................................................................................................. 930
Margins are wide ................................................................................................................................................................... 930
When printing on thin roll paper, the printed surface becomes scratched ................................................ 931
Clearing Jammed Roll Paper
Clearing Jammed Roll Paper
If roll paper jams, follow the steps below to remove jams.
1
Turn the printer off. (See "Turning the Printer On and Off.")
2
Open the Top Cover.
•
Note
3
If the Carriage is out, move the Carriage out of the way,
away from the paper.
922
If the leading edge of the roll jams in the carriage such as when the paper curls strongly, you may be able to avoid
paper jamming by setting the roll cutting method to Manual and setting the detection of paper leading edge to Do
not perform.
(See "Specifying the Cutting Method for Rolls.")
P.21
➔
P.523
➔
iPF8400S
User's Guide