Paper Size Options Dialog Box - Canon imagePROGRAF iPF8400S User Manual

Paper Size Options Dialog Box

• To display the Output Method dialog box, on the Page Setup sheet, click Output Method. (See "Page Setup
Sheet .")
Note
• A
Output Method
If Print is selected, the print job is saved to the printer hard disk after printing has finished.
If Save in mail box is selected, the print job is saved to the printer hard disk. If you choose Save in mail box,
also specify the destination personal box in the Mail box list.
If Print after reception is complete is checked, you can prevent degradation of print quality that occurs when
receiving a print job is interrupted and printing is aborted in the middle.
These can be selected as Print options.
• B
Name of data to be saved
To use the file name, choose Use file name.
Otherwise choose Enter name and enter a name in Name.
• C
Mail box
Displays a list of mail boxes. If you choose Save in mail box, also specify the destination personal box from the
list.
• D
Acquire Mail Box Name
When this is clicked, the box name acquired from the printer main unit is displayed in Mail box.

Paper Size Options Dialog Box

Paper Size Options Dialog Box
In the Paper Size Options dialog box, you can create and register your own Custom Paper Size. The sizes you define
are listed with standard paper sizes for selection later as needed.
• You cannot create any arbitrary roll paper width as a Custom Paper Size.
• If you select a Paper Size from Paper Size Options, load paper of a size equal to or larger than the Paper Size Options
Important
into the printer. If the size of the loaded paper is smaller than the Paper Size Options, an incomplete output image may be
printed.
• To display the Paper Size Options dialog box, on the Page Setup sheet, click Paper Size Options. (See "Page Setup
Sheet .")
Note
186
• A
Paper Size List
Shows the names and sizes of paper that can be used with the printer driver.
P.183
➔
P.183
➔
iPF8400S
User's Guide