Switching The Video Using Buttons; Applying A Fade To Final Video Output - Roland VR-50HD Owner's Manual

Switching the Video Using Buttons

You can also switch the video by pressing the VIDEO INPUT SELECT
[1]–[4] buttons.
1.
Press any of the TRANSITION [CUT]–[WIPE] buttons to
select a transition effect .
2.
Use the TRANSITION [TIME] knob to set the duration of
the transition effect (from 0 to 4 seconds) .
3.
Press one of the VIDEO INPUT SELECT [1]–[4] buttons to
select the input channel you want to output from the
VR-50HD .
During the transition time while switching from one channel to
another channel, the indicators on both channels flash.
After the transition is completed, the indicators stop flashing and
the indicator for the selected channel stays lit.
MEMO
You can assign a still image saved on a USB flash drive to the
INPUT SELECT [STILL] button. Refer to "Using Still-image Files"
(p. 35).

Applying a Fade to Final Video Output

You can use the [OUTPUT FADE] button to apply a fade to the VR-
50HD's final output.
Applying a fade makes the output video gradually disappear (fade-
out) or appear (fade-in).
• When "MIX" or "WIPE" is selected as the transition effect, you can
use the TRANSITION [TIME] knob to adjust the length of time for
which the fade-out or fade-in is applied.
• When "CUT" is selected as the transition effect, the output video
appears or disappears instantaneously.
Applying a Fade-out
Pressing the [OUTPUT FADE] button starts a fade-out.
The button indicator flashes while the fade is in progress.
When the fade-out has been completed, the indicator stops
flashing and stays lighted.
Applying a Fade-in
Pressing the [OUTPUT FADE] button a second time starts a fade-in.
When the fade-in has been completed, the indicator goes dark.
MEMO
You can specify either white or black as the fade color. At the
menu screen (p. 13), touch System <Setup> to display the System
screen, then make the setting for Output Fade.
Video Operations
25